There is simply no better place to get your Toyota Pickup Mechanical items from. We offer only the best quality Toyota Pickup Mechanical inventory and for less than other dealers. Getting your OEM aftermarket Pickup Mechanical through us can save you over 75% compared to an item from a Toyota dealer.
Buy Mechanical replacement for your Toyota Pickup and get the quality you need for the price you can afford.
Read more...
| Description:
| Oil Drain Plug Gasket
Fiber | | Fits:
| 1988 Toyota PUP 2WD CarbReg&XCab (Engine: 22R)
Dimensions= 24mm OD; 12mm ID; 2mm thick. The gaskets are usually black, but the reddish-orange and/or the yellow/tan colored ones will work just fine. | | Brand:
| Ishino | | Part Number:
| A6120-31114/ISH | | Retail Price:
| $2.45 | $1.95 * |
| | | Description:
| Crankshaft Seal
Front | | Fits:
| 1988 Toyota Pickup V6 4WD StdBed (Engine: 3VZE)
For oil pump | | Brand:
| THO | | Part Number:
| A8060-110690/THO | | Retail Price:
| $10.93 | | $9.45 * |
|
| Description:
| Oil Filter
| | Fits:
| 1983 Toyota Pickup 4WD Std Bed (Engine: 22R)
| | Brand:
| NPN | | Part Number:
| A6000-52665/NPN | | Retail Price:
| $8.95 | | $9.45 * |
| | | Description:
| Valve Cover Gasket
| | Fits:
| 1978 Toyota Pickup Std/Long Bed (Engine: 20R)
| | Brand:
| Ishino | | Part Number:
| A8030-14818/ISH | | Retail Price:
| $19.04 | | $9.45 * |
|
| Description:
| Oil Pump
| | Fits:
| 1988 Toyota Pickup V6 4WD StdBed (Engine: 3VZE)
Front crank seal sold separately, 90311-40022. | | Part Number:
| A6010-34555 | | Retail Price:
| $213.34 | | $99.95 * |
| | | Description:
| Cylinder Head Gasket Set
| | Fits:
| 1988 Toyota Pickup V6 4WD StdBed (Engine: 3VZE)
The 3VZE engine is experiencing possible "head gasket" problems. The dealer has been covering the first repair up to 100,000 miles driven, but they are not covering the second head gasket repair. From 061705 our head gaskets are of the latest design change, containing the OE Sanwa made head gaskets, 11115-65033 and 11116-65033. But the actual problem is w/ the head design. Prior to 061705, our head gaskets, were made by Ishino, and were designed based on the 11115-65031/2 and 11116-65031/2, which will work just fine. | | Brand:
| Ishino | | Part Number:
| A8010-88352/ISH | | Retail Price:
| $375.80 | | $262.95 * |
|
| Description:
| Timing Belt Tensioner
Hydraulic type | | Fits:
| 1993 Toyota Pickup V6 2WD RegCab (Engine: 3VZE)
Prior to 08-1992, no belt tensioner was used. Just an upper & lower idler. Hydraulic type, not a tensioner/bearing. | | Brand:
| OE Service | | Part Number:
| A5030-51937/OES | | Retail Price:
| $57.13 | | $45.95 * |
| | | Description:
| Oil Pan Gasket
| | Fits:
| 1978 Toyota Pickup Std/Long Bed (Engine: 20R)
Toyota does not list a gasket for 1985 and later models. They say to use an anerobic sealant. However this gasket does fit the pan and can be used instead of straight sealant. | | Brand:
| Ishino | | Part Number:
| A6130-15871/ISH | | Retail Price:
| $21.97 | | $11.45 * |
|
| Description:
| Main Bearing Set
Std Size, Standard | | Fits:
| 1983 Toyota Pickup 2WD Std Bed (Engine: 22R)
This set has both side "locating notches" and center "locating notches" If the engine requires all side locating notches, use part # 11702-38010 - Set # 11702-38010 is used mainly on 02/82 and earlier models - | | Brand:
| NDC Bearings | | Part Number:
| A2010-15617/NDC | | Retail Price:
| $162.20 | | $39.95 * |
| | | Description:
| Timing Gear Kit
Single row chain | | Fits:
| 1988 Toyota PUP 2WD CarbReg&XCab (Engine: 22R)
Reqs (1) Oil Pump O-Ring - Part # 15188-38030 | | Part Number:
| A5061-11398 | | Retail Price:
| $203.92 | | $101.95 * |
|
